Remington 104316-01 Owner's Manual download pdf (Page 14)

14

097017

ELECTRIC CHAIN SAW

®

PUSH

TO

SHARPEN

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced

as cutters are sharpened. After every second

or third sharpening, reset cutter depth gauges.

1. Place depth gauge tool (.025") ﬁrmly

across top of two cutters. Make sure

depth gauge enters slot in depth gauge

tool (see Figure 22).

2. Use medium ﬂat ﬁle. File depth gauge

level with depth gauge tool.

3. Remove depth gauge tool. With ﬂat ﬁle,

round off front corner of cutter depth

gauge (see Figure 23).

After several hand ﬁlings, have authorized

service center or sharpening service machine

sharpen chain. This will insure even ﬁling.

Figure 22 - Depth Gauge Tool On Chain

Flat File

Depth

Gauge

Slot

Figure 23 - Round Off Front Corner Of

Depth Gauge

Depth

Gauge

Tool

Depth Gauge

Front Corner

.025"

CLEANING AND

MAINTENANCE

Continued

WARNING: Unplug chain saw

from power source before servic-

ing. Severe injury or death could

occur from electrical shock or

body contact with moving chain.

WARNING: Cutting edges on

chain are sharp. Use protective

gloves when handling chain.

WARNING: Do not hand-

sharpen this Fast Sharp chain.

Hand-sharpening chain will in-

crease risk of kickback.

Figure 24 - Turning Sharpener Knob

Keep chain sharp. Your saw will cut faster

and more safely. A dull chain will cause

undue sprocket, guide bar, chain, and motor

wear. If you must force chain into wood and

cutting creates only sawdust with few large

chips, chain is dull.

Follow the steps below to sharpen Fast

Sharp chain. The automatic chain sharpener

sharpens cutter, lowers cutter depth gauge,

and adjusts guard drive link.

1. Adjust saw chain for proper tension

(see Saw Chain Tension Adjustment,

page 7).

2. Clean out excess sawdust and wood

chips from drive sprocket area.

3. Turn sharpener knob counterclockwise

until clicking stops (see Figure 24).

4. Turn sharpener knob clockwise until

you hear ﬁve distinct clicks.

SHARPENING SAW CHAIN

(Fast Sharp Model)

Figure 25 - Sharpening Fast Sharp Chain

Sharpener

Knob

REPLACING SAW CHAIN

Replace chain when cutters are too worn to

sharpen or when chain breaks. Only use

replacement chain noted in this manual.

Always include new drive sprocket when

replacing chain. This will maintain proper

driving of chain.

Note:

For proper chain and

drive sprocket, see Replacement Parts and

Accessories, on back cover.

5. Place saw on clean, ﬂat surface.

6. Connect saw to power supply.

7. Hold saw, with both hands in normal

cutting position.

8. Press in switch lockout with right

thumb and squeeze trigger.

9. Gently push on sharpener knob. Saw

must be running for chain to sharpen.

Note:

Sparks appearing shows sharp-

ener is working (see Figure 25). If no

sparks appear, continue to adjust sharp-

ener one click at a time. After each

click, press sharpener knob until light

ﬂow of sparks appears.

After several sharpenings, you must turn

sharpener knob more to bring stone into

position.

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments