Remington D-3200N User Manual download pdf (Page 3)

Operating Instructions

2. Should the ALCI safety device trip (i.e., reset

button pop out) during use, press the reset

button. Should the dryer fail to reset, return

the dryer to Remington Customer Service for

examination and repair or replacement.

Never operate this appliance if it has been

dropped in water; return it to Remington

Customer Service for examination and repair

or replacement.

3. The dryer is designed to work on ordinary

household current only, 125 volts A.C.,

60 Hz. It is not intended for commercial use.

4. This appliance is equipped with an automatic

thermal limiter which will cycle off when

overheated and come back on when cooled

down. If the unit cycles off, unplug the cord

for several minutes before restarting.

5. This appliance has a polarized plug (one

blade is wider than the other). As a safety

feature, this plug will fit in a polarized outlet

only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician. Do not

attempt to defeat this safety feature.

1. This hair dryer is provided with an

appliance leakage circuit interrupter

(ALCI) safety device built into the plug.

This device is designed to make the

unit inoperable under some abnormal

conditions, such as accidental immer-

sion in water. The ALCI safety device

is equipped with a test button so that

its operation can be checked.

This unit should be tested before each

use to confirm that the safety device is

operational.

TO TEST:

After plugging in your hair dryer:

A. Press the reset button on the

ALCI device.

B. Press the test button. The reset button

will pop out. This verifies that the

safety device is operating properly.

C. Press the reset button to reactivate

your ALCI safety device.

D. Your hair dryer is now ready for use.

Note: This unit may automatically trip

when unplugged. If so, unit must be

reset after it is plugged in. After

following the above testing procedure,

should the indicator device not function

properly, return the dryer to Remington

Customer Service for examination and

repair or replacement.

1 2 3 4 5 6 7

Comments to this Manuals

No comments