Remington 500V User Manual download pdf (Page 14)

106763

Operation

1. Grasp barrel assembly and slide forward rapidly until it stops. Push barrel

assembly back into tool to the closed position. This sets piston into firing position.

4. Place the muzzle of tool perpendicular to work surface without tilting the tool.

Push tool against work surface until sliding action of barrel stops.

3. Select the proper power level of power load strips and power indicator setting

(see

Power Loads and Power Indicator Setting,

page 13). Always insert power

load strips through bottom of handle. Push power load strip in until even with

bottom of handle.

NOTE:

Failure to start with

the proper power

level and power set-

ting can result in over-

drive condition and

will result in damage

to tool (See page 13).

2. Insert power fastener into muzzle of tool, head end first. Push the fastener until

point is even with end of muzzle.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Remington 500V User Manual Page 14