Remington 500V User Manual download pdf (Page 18)

106763

Tool Disassembly

Figure 2 - Removing Key Stop

Key Stop

A. REMOVING BARREL ASSEMBLY

1. Using screwdriver, lift end of annular spring and rotate spring until key stop is

uncovered (see Figure 1).

WARNING: Always unload a powder actuated tool before disassembling,

replacing barrel, cleaning, or assembling.

6. Pull piston assembly, using moderate force, from barrel (see Figure 4).

3. Firmly grip and pull barrel assembly from the outer liner assembly.

4. Unscrew muzzle cap.

5. Pull plastic buffer out of muzzle cap (see Figure 3).

Figure 3 - Separating Barrel Assembly from Housing

Muzzle Cap

Plastic

Buffer

Barrel

Assembly

Piston

Figure 4 - Removing Piston Assembly from Barrel

Figure 1 - Rotating Annular Spring to Uncover Key Stop

2. Push key stop towards rear of tool and remove (see Figure 2).

Outer Liner

Assembly

Annular Spring

Key Stop

Piston

Assembly

Barrel

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Remington 500V User Manual Page 18