Remington RM1632A Owner's Manual download pdf (Page 11)

OPERATING CHAIN SAW

_k WARNING: Read and understand this

owner's manual before operating this saw.

Make certain you read and understand all

Important Safety Information. improper

use of this chain saw can cause severe

injury or death from fire, electrical shock,

or body contact with moving chain, or

falling wood.

FiLLiNG OiL TANK

1. Removeoii cap.

2. Fill oil tank with SAE #30 motor oil. Note: For

temperatures below 30°F, use SAE #10 oil. For

temperatures above 75°F, use SAE #40 oil.

3. Replace oil cap at once. Tighten oil cap firmlyfor

good seal. This will avoid oil seepage flom tank.

4. Wipe off excess oil.

Note: It is nonnal for oil to seep when saw is not in

use. Empty oil tank after each use to prevent seep-

age.

IMPORTANT: DO NOT USE BAR AND]

CHAIN OiL

OiLiNG CHAIN

Manual Oil System

Always check oil level before using saw. Do not

attempt to operate the oil system while saw is in

operation. To oil chain, press squeeze bulb. Oil will

teed onto the guide bar and chain. Press squeeze bulb

atleast once before each cut. Check oil level often by

looking at oil sight window (see Figure 7).

Oil Sight Window

Figure 8 - Oil Sight Window Location for Model

RM1635W

EXTENSION CORDS

Use proper extension cords with this saw. Use only

extension cords marked for outdoor use.The cord must

be marked with suffix W or W-A following the cord

type designation. Example: SJTW-A or SJTW.

Use propersized cord withthis saw.Cord must be heavy

enoughto canT curreNneeded.An undersized cordwill

causevoltagedropat saw.Saw willlosepowerand over-

heat. Follow cord size requirementslisted below.

Cord Length AWG Cord Size

25 feet 16 AWG

50 feet 16 AWG

100 feet 14 AWG

150 feet 12 AWG

Keep cord away from cutting area. Make sure cord

does not catch on branches or logs during cutting.

Inspect cords often. Replace damaged cords.

This chainsaw is designed with anextensioncord hitch

that preventstheextensioncord Irom beingpulled loose

during use. To use, form a loop with the end of the

extension cord, insert loop into skit in mar of handle,

and place loop over cord hitch (see Figure 9). Gendy

pull loop against cord hitch until slack is removed.

Plug extension cord into chain saw cord.

Figure 7- Oil Squeeze Bulb and Oil Sight Window

Location for Model RM1632A

PowerCord

Automatic Oil System

Chain saw Model RM 1635W is equipped

with an automatic oiling system. It will provide ad-

equatelubricationto theguidebar andsaw chain.Check

oil level eveU 15minutes ofcutting time. Oil levelcan

be seen in oil sight window (see Figure 8).

Cord Hitch

Extension Cord - -

Figure 9 - Looping Extension Cord over Cord

Hitch

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 70 71

Comments to this Manuals

No comments

Remington RM1632A Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Power chainsaws Remington RM1632A