Remington ST3010A User Manual download pdf (Page 12)

 

118336



4. Remove the line retaining ring from

the spool (see Figure 4-13).

5. Measure out 30 feet of replacement

line.

6. Push one end of the new line through

the left line mounting hole on the

spool (see Figure 4-14).

7. Feed 15 feet of the line through this

hole. Feed the other 15 feet of line

through the right line mounting hole

(see Figure 4-15). Pull the line tight

(see Figure 4-16).

Figure 4-13: Removing line retaining ring

Figure 4-14: Inserting line in left hole

Figure 4-15: Inserting line in right hole

Figure 4-16: Pulling line tight

Line Retaining

Ring

Direction of

Line Feed

Direction of

Line Feed

Direction of

Line Feed

Figure 4-17: Arranging line into spool

Figure 4-18: Placing upper spool line into retaining ring

Retaining

Slot

8. Lay the line from the left mounting

hole into the upper spool section. Lay

the line from the right mounting hole

across the other line. Insert this line into

the retaining slot between the upper

and lower spool section, then lay the

line into the lower spool section. See

Figure 4-17 for proper line placement.

9. Place the line from the upper spool

section through the line retaining ring

(see Figure 4-18).

10. Place the line retaining ring back on

the spool (see Figure 4-19).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments