Remington ST3010A User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
 
118336
 
 
25 feet
50 feet
100 feet
150 feet
18 AWG
16 AWG
16 AWG
14 AWG
   


Safety
Warnings






Use proper extension cord with this tool.
Use only a polarized (i.e., one blade is
wider than the other), UL listed exten-
sion cord marked for outdoor use. e
cord must be marked with suffix W or
W-A following the cord type designation.
Example: SJTW-A or SJTW.
Use proper sized cord with this tool. Cord
must be heavy enough to carry current
needed. An undersized cord will cause
voltage drop at trimmer. e trimmer will
lose power and overheat. Follow cord size
requirements listed below.
Inspect cord often. Replace if damaged.






e trimmer has a built-in extension cord
retainer. is cord hitch prevents accidental
disconnection of the power cord during
use. e cord hitch is molded into the
trimmer shaft.
1. Plug power cord into extension cord
(see Figure 4-1).
2. Create a loop in the extension cord
and insert through the bottom of the
tool housing (see Figure 4-2).
3. Pull the loop tight around the molded
cord hitch (see Figure 4-3).
Note: An optional method of retaining
the extension cord is shown in Figure
4-4. Use this method with larger-gauge
cords that may not fit into the extension
cord retainer.
Figure 4-1: Plugging extension cord into power cord
Figure 4-3: Pull extension cord loop tight around molded
cord hitch
Figure 4-4: Optional method of retaining extension cord
Figure 4-2: Inserting extension cord loop through bottom
of handle
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

Comments to this Manuals

No comments