Remington HC5780 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
E After Each Use
• Ensuretheclipperisswitchedoanddisconnectedfromthemains.
• Brushtheaccumulatedhairfromtheblades.Donotsubmergetheclipperinwater.
• Tocleanunit,wipewithdampclothanddryimmediately.
C WASHABLE CLEANING
TheQUICKWASHSYSTEMisdesignedtomaximisetheeciencyofwashablecleaning.
• Clickthebuttonsthatarelocatedonthesidesofthehairclipperhead.Thebladeswill
slide out and the blade set can be easily cleaned under the tap.
• Oncethebladesarecleanedthebladesarelockedintoplacebypushingthebladeset
towards the hair clipper head and will snap into place.
• Donotruntheentireunitunderthetap,onlythebladesetismeanttobesubmergedin
water.
Note:Ensuretheclipperisturnedowhencleaning.
, EVERYSIXMONTHS
•Atregularintervalsthebladesetshouldberemovedandcleaned.
• Removethe2screwsretainingthexedbladewithascrewdriver.Donotremoveblade
set.
• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donotremovethe
lubricatinggreasefromtheblades.Itisnotnecessarytoremovethesmallmovingblade
from the unit.
• Ifthemovingbladehasbeenremovedthiscanbere-ttedbyslottingthecoatedblade
holder over the pin in the centre of the interior product head. The groove on the coated
blade,justbelowtheteeth,restsonametalplateattheoppositesidetothescrewholes.
Thexedbladeisttedwiththeraisedprolepointingoutwardsandxedwiththe2
screws.
, Notethatifthebladesarenotcorrectlyalignedthencuttingeciencywillbeimpaired.
• Placeafewdropsofcutterorsewingmachineoilontotheblades.Wipeoexcessoil.
A CLEANING CAUTIONS
•Onlytheattachmentguidecombsandtrimmerblademayberemovedfromtheproduct
for cleaning.
•Cleaningshouldbedonewithasoftbrush,suchasthebrushsuppliedwiththeproduct.
•Donotuseharshorcorrosivecleanersontheunitsortheirblades.
ENGLISH
HC5780 -INT-T22-amended.indd 7 11/19/2012 12:09:36 PM
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 155 156

Comments to this Manuals

No comments