Remington mb4560 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
5
, CAUTION
• Extendedmainsonlyusewillresultinthereductionofthebatterylife.
, WARNING
• Theappliancecannotbeoperatedincordedmodewhileconnectedtoa
PC via the USB port.
, CORDLESS USE
• Whentheunitisswitchedonandfullycharged,theproductcanbeusedin
cordless mode for 50 minutes.
F INSTRUCTIONS FOR USE
• Alwayscombyourbeardormoustachewithanecombbeforeyoustart
trimming.
• Turntheproductonbyslidingthe3positionslideswitchdowntothe
middle position. This will turn the LCD display on and enable height
adjustments and boost adjustments to be made.
• Yourtrimmercanbeadjustedineither0.1mmor0.5mmincrements.To
switch between these, press and hold the mode button for 3 seconds. The
increment that the trimmer is now set at will be displayed (or ash) for 1
second.
, USING THE TOUCH SCREEN
• Thetrimmercombcanbeadjustedtogiveyou175dierenttrimlengths,
with 0.1mm increments, simply by pressing the arrows on the touch
screen. Press and hold the arrow up to increase the cutting length and
down to decrease it. The setting number will appear on the digital display.
• Selectthedesiredboostlevelbypressingtheboostbuttonwiththe3
position slide switch in the middle position. The display will indicate the
level.
• Oncethedesiredlengthandboostlevelhavebeenselectedslidethe3
position slide switch to the last position (the furthest down) to lock the
cutting length and turn the motor on.
• Toadjustthelengthorboostlevel,simplyslidethe3positionslideswitch
back into the middle position and adjust the cutting length or boost level
by pressing the arrows or boost button on the touch screen.
, Please note that the motor will only run when the 3 position slide switch is
set to lock, the last position (furthest down). This is to ensure the cutting
length does not adjust whilst you are trimming your facial hair.
Page view 4
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments