Remington Precision Beard & Mustache Trimmer User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
GETTING STARTED
CHARGING YOUR GROOMER
Before using your Groomer for the first time, charge for 14 to 16
hours.
• Check to ensure that the Groomer On/Off switch is OFF.
Place your Groomer into the charging stand and then plug the
charging adapter into a 230/240 volt domestic power outlet. The
red Charge Indicator Light will glow to indicate that the groomer
is charging.
The batteries cannot be overcharged, but we recommend that
charging be discontinued if the Groomer will not be used for an
extended period of time.
The Groomer will be fully charged in 14 to 16 hours.
If the Groomer has not been used for a long period of time, it is
advisable to recharge it for 14 to 16 hours before use.
To preserve the life of the batteries, discharge them by running
the Groomer until the blades move slowly.
Switch off and recharge for 14 to 16 hours. Do this every six
months.
Use the Groomer only with the charging adapter supplied.
BEFORE USING YOUR GROOMER
Your Professional Personal Groomer is washable, enabling use in
the shower and easy cleaning.
To maintain the performance of the cutters, oil before each use and
after rinsing.
OILING THE BLADES
Turn the Groomer on to distribute the oil evenly. Prior to trimming
hair, wipe off any excess oil. Be sure that the Groomer is turned off
when applying the oil.
REMINGTON
®
PROFESSIONAL DLC
WASHABLE PERSONAL GROOMER
Use and Care Instructions
Thank you for purchasing the Remington
®
Professional Diamond
Like Carbon (DLC) Washable Personal Groomer. Your groomer will
provide a quick and easy way to maintain a well-groomed look for
your facial hair. Short hair styles and tramlining detail can also
be created. To help you define head-turning styles and to extend
the life of your Personal Groomer, please read all instructions
before using.
KEY PARTS
TO DEFINE THE BEARD/MOUSTACHE LINE
Refer Diagrams 2 & 3
Use a small comb to comb the hairs
straight for trimming.
Hold the groomer with the 18mm
Detail Trimming Attachment blade
facing you.
Start with the edge of the beard/
moustache line and gently lower
the Trimmer Blade onto your skin.
Use motions toward the edge of the
beard/moustache line to trim to the
desired shape in the facial area and
away from the beard in the neck
area.
TO CUT SHORT HAIR STYLES
Hairs should be dry and free of waxes or lotions before using
the Groomer.
Comb your hair in the direction in which it grows so that the
hairs are at their maximum height and facing in the same
direction.
• Place an attachment comb on the 30mm Trimmer Blade.
• Place the flat top of the Attachment Comb against the head.
Slowly slide the groomer through the hair. Repeat from different
directions if necessary.
If hair builds up in the Attachment Comb during the trimming
process, switch the unit off, pull the comb off the groomer and
brush or rinse clean.
REVERSIBLE ATTACHMENT COMBS
The two Reversible Attachment Combs are for use with the
30mm Trimmer Attachment only. To attach a comb, gently slide
the comb over the Trimmer Attachment. Arrows on the side of
the comb indicate the length the hair will be cut to.
The two combs allow you to select cutting lengths of 3mm, 6mm,
9mm & 12mm, each comb being marked accordingly.
When first using the groomer, you may want to begin with the
longest attachment comb to avoid trimming the hair too short.
Cut the hair gradually, using short strokes. Always take off a
little hair at a time; you can always trim off additional hair later.
As you work, comb the hair frequently back into the style that
you are cutting.
BEST TECHNIQUE
Tips for trimming hair on the various parts of your face and head.
(guide only)
TO THIN AND TAPER THE BEARD/MOUSTACHE
Refer Diagram 1
Follow these simple steps:
Before you begin, comb your hair
in the direction in which it grows so
that the hairs are at their maximum
height and facing the same direction.
Slide an Attachment Comb onto the
30mm Trimmer Attachment.
• Turn the Groomer ON.
Place the flat top of the Attachment Comb against the skin.
Slowly slide the groomer through the hair. Repeat from different
directions as necessary.
If hair builds up in the Attachment Comb during the trimming
process, switch the Groomer off, pull the comb off the groomer
and brush/rinse clean.
TO CREATE TRAMLINES INTO HEAD HAIR
Refer Diagram 4.
Attach the 30mm Trimmer Blade
Attachment.
With the blade facing the area where
you would like to start your tramline,
gently lower it onto the head.
Move the groomer gently along your
head to create the style you require.
NB: For more precise designs, attach
the 18mm Detail Trimmer Blade
Attachment.
TRIMMING THE EDGE OF SIDEBURNS
Using the 18mm Detail Trimmer Blade Attachment, hold the
Groomer with the blade facing you.
Start with the edge of the sideburn and with the cutting blades
resting lightly against your skin, use motions towards the edge of
the sideburn line to trim as required.
TRIMMING THE NAPE OF THE NECK
Refer Diagram 5
You will need a mirror for this operation if performing it alone.
Before you begin, attach the 30mm Trimmer Blade Attachment.
Use your fingers to lift the hair at the base of your head up off
the neck. Your index finger should be covering the roots of the
hairs that you are lifting to prevent accidental removal by the Groomer.
Using your other hand, hold the groomer to
the base of the neck with the cutting blade
facing up and move the groomer up the
length of the neck until the unit touches your
finger covering the hair roots at the base of
your head. Be sure to move the groomer
slowly when performing this operation and
to keep the hair roots at the base of the head
out of the way of the groomer.
Diagram 1
Diagram 2
Diagram 3
Diagram 4
On/Off Switch
30mm
Trimmer Blade
Attachment
Nose, Ear and Eyebrow trimmer
18mm Detail
Trimmer Blade Attachment
Charge Indicator Light
Charging and
Storage Stand
2 Reversible Attachment
Combs for the 30mm
Trimmer Attachment
Cleaning Brush
Barbers Comb
Scissors
Lubricating Oil
Mini-foil
shaver head
attachment
Diagram 5
Page view 1
1 2

Comments to this Manuals

No comments