Remington Precision Beard & Mustache Trimmer User Manual download pdf (Page 5)

Cleaning & Maintenance

Cleaning and Maintaining

Your Trimmer

Your trimmer is fitted with high-quality hardened steel or

ceramic cutting blades that are permanently lubricated.

Cleaning should only be done with a soft brush, such as the

brush supplied with the unit.

Clean your trimmer regularly to ensure that the

unit’s operating life is not prematurely shortened.

■ Unplug adapter from wall outlet (MB-30, MB-35, MB-40,

MB-45 & MB-50).

■ Do not apply pressure or hard objects to the cutters.

■ Do not use liquid cleaners on the cutters or harsh or

corrosive chemicals on the unit’s main body.

Weekly

Trimmer should always be shut off. Remove trimmer

guard attachment from trimmer. Shake or blow out any

accumulated hairs.

Main trimmer

Flip the blades open by pushing upward

on the cutter teeth. The

cutter assembly will swing up and the

underside of the cutter assembly will be

accessible.

2. Blow out any

loose hair that has accumulated. Brush out any

remaining hair from the cutter teeth and hair

pocket with the brush

provided. Do not rinse the cutter

assembly under water or use cleaning fluids, which

could remove the lubrication.

Miniature Trimmer (MB-40, MB-45, MB-50)

■ Flip the miniature trimmer up into operating position.

■ Brush any hair from the trimmer blades and blow out

any hairs from the recess that holds the trimmer in

retracted position.

Troubleshooting

(MB-30, MB-35, MB-40, MB-45, MB-50)

The trimmer does not work when turned on:

■ Trimmer must be charged for a full 14-16 hours- MB-30, MB-35, MB-

40 and MB-45 (3 HRS for MB-50).

■ Contact an authorized Remington Service Center regarding

battery replacement (see enclosed card for the nearest location).

Trimmer cutters do not move:

■ The cutting unit may be dirty and clogged. Clean the unit as directed

in Cleaning & Maintenance section.

Trimmer does not hold charge:

■ Fully discharge battery by running trimmer until it stops; then follow

recharging instructions (see section on To Charge/Recharge). If time

between recharging cycles does not increase, battery may need replacing.

Contact an authorized Remington Service Center (see separate card in this

package for the location nearest you).

Troubleshooting

(MB-10)

The trimmer does not work when turned on:

■ Be certain batteries have been properly installed. Trimmer will not

operate unless batteries are correctly positioned.

■ If battery power has been depleted, replace with 2 “AA” alkaline

batteries (see Battery section).

■ Contact an authorized Remington Service Center regarding

battery replacement (see enclosed card for the nearest location).

Trimmer cutters do not move:

■ The cutting unit may be dirty and clogged. Clean the

unit as directed in Cleaning and Maintenance section.

You need help…

service information or locations:

Call 1-800-736-4648 for the authorized Remington Service Center

closest to you or contact one of the Remington Service Centers provided

on the enclosed card accompanying this package.

If the MB-50 trimmer requires charging, but the charger light does not glow

when the charging adapter is connected, the batteries may have been

severely discharged or not recharged for a long period of time. Connect the

charger to the trimmer and plug the charger into a 120 VAC outlet. After

three minutes, turn ON/OFF switch on, then off. Continue to charge the

trimmer for 24 hours.

Battery Removal

(MB-30, MB-35, MB-40, MB-45, MB-50)

When your rechargeable Beard & Mustache Trimmer

reaches the end of its useful life, the batteries must

be removed from the shaver and recycled or

disposed of properly in accordance with your local

and state requirements.

The following procedure should be followed for battery removal:

■ Make sure your trimmer is unplugged from any

outlets so you don’t risk an electric shock.

■ Remove the trimmer guard as instructed in the

section Removing Trimmer Guard Attachment.

■ Using a small Phillips head screwdriver, remove

the four screws from the trimmer (2 in back, 2 under

the comb).

■ Pull or gently pry the trimmer halves apart,

exposing the batteries.

■ Lift the rubber side panels from their cradles and

put them aside.

■ Pull or pry batteries from PC board.

■ Twist batteries to break wires. Wires may also be cut.

CAUTION: THESE NICKEL-CADMIUM BATTERIES MUST BE

RECYCLED OR DISPOSED OF IN ACCORDANCE WITH STATE AND

LOCAL REGULATIONS.

Do not burn or mutilate, as they may burst or

release toxic materials. Do not short-circuit, as this may cause burns.

BATTERY MUST BE RECYCLED

OR DISPOSED OF PROPERLY.

Ni-Cd

CONTAINS NICKEL-

CADMIUM BATTERY.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Comments to this Manuals

No comments

Remington Precision Beard & Mustache Trimmer User Manual Page 5

Comments to this Manuals

Related products and manuals for Electric Shavers Remington Precision Beard & Mustache Trimmer