14
www.remingtonpowertools.com
STORAGE
If storing Pole Saw for more than 30 days, follow
steps below.
1. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mixture.
2. Dry guide bar and chain.
3. Place chain in container filled with oil. This will
prevent rust.
4. Wipe a thin coating of oil over surface of guide
bar.
5. Wipe off outside of Pole Saw body. Do this with
soft cloth dampened with a mild soap and water
mixture.
6. Store Pole Saw
• in a high or locked place, out of children’s
reach
• in a dry place
• with scabbard over guide bar
TECHNICAL SERVICE
You may have further questions about assembling,
operating, or maintaining this product. If so, you
can visit our Technical Service web site at www.
remingtonpowertools.com or contact our Techni-
cal Service Department at 1-800-626-2237 (English
Only). You may also write to:
DESA Power Tools
P.O. Box 90004
Bowling Green, KY 42102-9004
ATTN: Technical Service
When contacting DESA Power Tools, have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of receipt for
written requests).
REPLACEMENT PARTS AND
ACCESSORIES
WARNING: Use only replacement
parts and accessories described in this
manual. Use of other parts or accessories
could damage saw or injure operator.
For original replacement parts and accessories, con-
tact your nearest Authorized Dealer or Authorized
Service Center for this product. If they can not sup-
ply the part or accessory, contact your nearest Parts
Central listed on page
47. Each Authorized Dealer,
Authorized Service Center, and Parts Central is
independently owned and operated.
See page 46
for an Illustrated Parts List.
If you need additional referral information, contact
our Technical Service Department (see Technical
Service).
In Canada call 1-800-561-3372 for parts information.
REPAIR SERVICE
Note: Only use original replacement parts. This will
protect your warranty coverage for parts replaced
under warranty.
Each Authorized Service Center is independently
owned and operated.
Warranty service
If product requires warranty service, return it to
nearest Authorized Service Center. You must show
proof of purchase. If faulty materials or workmanship
caused damage, we will repair or replace product
without charge. Note: Normal wear, misuse, abuse,
neglect, or accidental damage is not covered under
warranty.
Non-warranty service
If product requires service, return it to nearest Au-
thorized Service Center. Repairs will be billed to you
at regular repair list prices.
For additional Service Center or warranty informa-
tion, call 1-800-626-2237 or visit our Technical Ser-
vice web site at www.remingtonpowertools.com.
REPLACING SAW CHAIN
Replace chain when cutters are too worn to sharpen or
when chain breaks. Only use replacement chain noted in
this manual. Always include new drive sprocket when
replacing chain. This will maintain proper driving of
chain. Note: For proper chain and drive sprocket,
see Illustrated Parts List.
We reserve the right to amend these specifi cations
at any time without notice. The only warranty ap-
plicable is our standard written warranty. We make
no other warranty expressed or implied.
(38 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals