Remington HH-215T-KFA User Manual download pdf (Page 10)

Maintenance (Continued)

SPARK PLUG:

Clean and re-gap every 600 hours of operation, or replace as

needed.After removing the Spark Plug, clean the terminals with a

wire brush. Re-gap the terminals to 0.140” (3.5mm).

PHOTOCELL:

The Photocell should be cleaned at least once per heating sea-

son or more depending on conditions.

Use a cotton swap dipped in water or alcohol to clean the lens of

the Photocell. Note the proper Photocell position as noted in

Figure 17 and Figure 18.

FUEL FILTER:

The Fuel Filter should be cleaned at least twice per heating sea-

son by rinsing it in clean 1-K kerosene. Contaminated fuel could

make this necessary immediately (See Figure 19).

NOTE: To remove the filter from models HH-45 / 70T-KFA, turn

filter 90

clockwise. To remove the filter from models HH-125T /

175T / 215T-KFA, turn filter 90

counter-clockwise.

Use of diesel may require additional maintenance.

Improper

maintenance can lead to poor combustion and soot

production.

Figure 19. Fuel Filter Replacement

Page 10 Pinnacle Products International, Inc. Kerosene User’s Manual

Figure 17. Photocell Positioning

Figure 18. Photocell Position for HH-45 / 70T-KFA

Figure 16. Spark Plug Replacement

Photocell

Lens

Installing Photocell:

1) Incorrect

2) Correct

Photocell

Wire

HH-70T-KFA only

Circuit Board

Ignitor Wire

Burner Head

Spark Plug

Gap

Side Cover

Screw

Power Switch

Power Switch Wire

Circuit Board

Fuel Filter

Photocell Wire

Fuel Line

NEVER LEAVE HEATER

UNATTENDED WHILE BURN-

ING OR WHILE CONNECTED

TO A POWER SOURCE

Kerosene

Forced Air Heaters

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Comments to this Manuals

No comments

Remington HH-215T-KFA User Manual Page 10

Comments to this Manuals

Related products and manuals for Space heaters Remington HH-215T-KFA