Remington R300 User Manual download pdf (Page 19)

106088

PART NO. DESCRIPTION

056415 Goggles

056485 Brush, 1/4 in.

056486 Brush, 5/8 in.

103754 Hex Wrench, 3/16 in.

102621 Accessory Muzzle Cap (for 3" pin)/Spall Shield Kit

103752 Hex wrench, 1/8 in.

Accessories

DISASSEMBLY

1. a.) Remove tang cap (1), compression

spring (2) and tang (3). If tang does not

drop out, thread 1/4-20 screw into tang

and pull out. Slide barrel assembly

from receiver (4).

2. Remove screw (9) in front of trigger

guard. Remove upper screw (10) from

recoil pad (11). Slide receiver (4) from

handle housing (12). Remove firing pin

(13) and firing pin spring (14). Remove

the recoil pad by removing the lower

pad screw (15).

b.) Remove muzzle cap (5) from barrel

(6) by unscrewing counterclockwise.

c.) Insert a rod or screwdriver into bar-

rel chamber (6) and push piston (7)

and buffer (8) out.

3. Replace barrel in receiver, align barrel

with ejector (16) and push breech (17)

to the rear. Remove set screw (18)

from breech. Turn and align firing pin

sear (19) with sear access hole. Re-

move sear and sear spring (20) from

breech Slide barrel and breech from

receiver.

Tool Disassembly and Assembly

WARNING ICON G 001

WARNING: Always unload a powder actuated tool before disassembling,

replacing barrel, cleaning, or assembling.

Barrel Assembly

Continued

For parts and accessories, please contact your dealer or distributor. If they are unable to satisfy

your requirements, please contact DESA International at the locations as stated on back page.

482-93

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Remington R300 User Manual Page 19

Comments to this Manuals

Related products and manuals for Power screwdrivers Remington R300