Remington RM4522TH Owner's Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
4 I
3 trimmer operation
_ WARNING: Read and under-
stand this owner's manual before
operating trimmer, Make certain
you read and understandall Safety
Warnings on pages I and 2 of this
manual. Improper useofthistrim-
mer can result in severe injury or
death from fire, electric shock, or
body contact with moving parts.
Extension Cords
Use proper extension cord with this trim-
mer. Use only a polarized (i.e., one blade
is wider than the other), UL listed exten-
sion cord marked for outdoor use. _he
cord must be marked with suffix W or
W-A following the cord type designation.
Example: SJTW-A or SJTW.
Use proper sized cord with this trimmer.
Cord must be heavy enough to carry cur-
rent needed.An undersized cord will cause
voltage drop at trimmer._he trimmer will
lose power and overheat. Follow cord size
requirements listed below:
Connecting Extension Cord
_lb WARNING: Fully seat the ex-
tension cord on the power cordof
tool. Failure to do socould lead to
overheating oftrimmer.This could
causeafirethat resultsin personal
injury to you or others.
he trimmer has a built-in extension cord
retainer._his cord hitch prevents accidental
disconnection of the power cord duringuse.
_Ihe cord hitch is molded into the lower
hand guard area of the tool housing.
1. Plug the power cord into the exten-
sion cord (see Figure 3-1).
2. Create a loop in the extension cord
and insert the loop through the bot-
tom of the tool housing (see Figure
;-2).
3. Pull the loop tight around the molded
cord hitch (see Figure 3-3).
Note: An optional method of retaining
the extension cord is shown in Figure
3-4. Use this method with larger-gauge
cords that may not fit into the extension
cord retainer.
Figure3-2:Insertingextensioncord100pthroughbottom
ofhandle
Figure3-3:Pullextensioncordlooptight aroundmolded
cordhitch
Keep cord away from cutting area. Make
sure cord does not catch on branches dur-
ing cutting. Inspect cord often. Replace
damaged cords.
Figure3-1:Pluggingtrimmer powercordintoextension Figure3-4:Optionalmethodof retainingextensioncord
cord
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments