Remington 100089-06 Owner's Manual download pdf (Page 28)

CLEANING AND

MAINTENANCE

Continued

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced as cutters are sharpened. After every

second or third sharpening, reset cutter depth gauges.

1. Place depth gauge tool firmly across top of two cutters. Make sure depth gauge

enters slot in depth gauge tool (see Figure 22).

2. Use medium flat file. File depth gauge level with depth gauge tool.

3. Remove depth gauge tool. With fiat file, round off front comer of cutter depth

gauge (see Figure 23).

Flat File Depth Gauge

Depth Gauge Tool

Depth Gauge

Slot

Figure 22 - Depth Gauge Tool On Chain

Front Comer

Figure 23 - Round Off Front Comer Of Depth Gauge

_-After several hand filings, have authodzed service center or sharpening service

i machine sharpen chain. This will insure even filing.

Replacing Saw Chain

Replace chain when cuttersare too worn to sharpen or when chain breaks. Only use

replacement chain noted in this manual. Always include new drive sprocket when

replacing chain. "this will maintain proper ddving of chain. Note: For proper chain

and drive sprocket, see Replacement Parrs and Accessories, page 28.

Ittl

097017

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Remington 100089-06 Owner's Manual Page 28