Remington 100089-06 Owner's Manual download pdf (Page 27)

CLEANING AND

VlAINTENANCE

Contmued

Sharpening Cutters.

Use file guide for 30 ° filing.

1. Adjust chain for proper tension (see Saw Chain Tension Adjustment, page 10).

12. Clamp guide bar in vise to hold saw steady. Note: Do not clamp chain.

3. Press 5/32" round file (attached to file guide) into Voove between top plate and

depth gauge on chain_ File guide should rest on both top plate and depth gauge

(see Figures 20 and 21). Note: File at midpoint of guide bar.

4. Hold file guide level. Make sure 30* mark on file guide is parallel to center of

guide bar (see Figure 20). This will insure that you file cutters at 30* angle.

5. File from inside towards outside of cutter until sharp.Only filein this one direction

(see Figure 20). Note: Two or three strokes with file should sharpencutter.

6. After each cutter if sharpened, move chain forward to sharpen next cutter.File

all cutters on one side of chain.

7. Move to'other side of chain and repeat process.

_. _ Filing

Direction

30° Guide

•5/32"

Round File

Note: This

illustrationshows

file guide pEace-

ment and filing

directionfor

sharpening cutters

on left side of

chain.

Figure 20 - File and File Guide Placement On Chain

Depth Gauge

(left side of chain)

of Chain

Gauge

(rightside of chain

Top Plate

(left side of

Right Side

of Chain

Top Plate

(rightside of chain)

m - Figure 21 - Chain Part Locations

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments

Remington 100089-06 Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for Power chainsaws Remington 100089-06