Remington RM4625 Operator's Manual download pdf (Page 6)

INSTALLING AND ADJUSTING THE WHEEL ASSEMBLY

Installing the Wheel Assembly

1. Set the unit on its side (Fig. 1).

2. Insert the wheel assembly into the wheel bracket (Fig. 1).

3. Insert the clevis pin through the wheel bracket and wheel

assembly and lock it in place with the cotter pin (Fig. 1).

NOTE: It may be necessary to adjust the position of the wheel

assembly before using the unit.

Adjusting the Wheel Assembly

1. Set the unit on its side (Fig. 1).

2. Remove the cotter pin and the clevis pin from the wheel bracket

and wheel assembly (Fig. 1).

3. Adjust the height by moving the wheel assembly along the wheel

bracket.

4. Insert the clevis pin through the wheel bracket and assembly

and lock it in place with the cotter pin (Fig. 1).

NOTE: Moving the wheel assembly down will raise the wheel height.

Moving the wheel assembly up will lower the wheel height.

ASSEMBLY

WARNING: To avoid injury from the tines, wear heavy

gloves and a long sleeve shirt when installing the wheel

assembly.

WARNING: To prevent serious personal injury, the wheel

assembly must be installed when operating the unit.

POSITIONING THE HANDLEBARS

1. Loosen the two knobs on the inside of the handlebars (Fig. 3).

2. With the unit upright, swing the handlebars up into the operating

position (Fig. 2).

NOTE: Take care not to pinch the throttle cable or switch wires

when positioning the handlebar (Fig. 3).

3. Tighten the knobs to secure the handlebars in place (Fig. 3).

NOTE: Do not over tighten the knobs.

4. Readjust the throttle cable and switch wires so they are smooth

and tight against the handlebar assembly. This will help prevent

them from catching or snagging during normal operation.

Fig. 2

Handlebar

Knobs

Fig. 3

Throttle Cable

and Switch Wires

Handlebar Knobs

Fig. 1

Clevis Pin

Wheel

Assembly

Wheel

Bracket

Lower Raise

Cotter Pin

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comments to this Manuals

No comments

Remington RM4625 Operator's Manual Page 6

Comments to this Manuals

Related products and manuals for Mini tillers Remington RM4625