Remington 18A-212B783 Owner's Manual download pdf (Page 12)

Motor/Blade

Control Lever

Safety Key

Overload Protection

Switch

Cutting Height

Adjustment Lever

Battery Level

Indicator

Starter

Button

Figure 4-1

WARNING: Read, understand, and follow all

instructions and warnings on the machine and in

this manual before operating.

Motor/Blade Control Lever

WARNING: The motor/blade control lever is a

safety device. Never attempt to bypass its

operations.

The motor/blade control lever is located on the upper handle

of the mower. The motor/blade control lever engages and

disengages the motor and blade.

Overload Protection Switch

The mower is equipped with an overload protection switch,

located on the motor/blade control. This overload protection

switch may pop out when too much strain is placed on the

motor. Refer to the Maintenance & Adjustments Section to reset

this switch.

Cutting Height Adjustment Lever

The cutting height adjustment lever is located above the right

rear wheel. To adjust the cutting height, refer to the Assembly

Section.

Starter Button

The starter button is located on the upper handle of the mower.

Engaging the motor/blade control lever with the starter button

pressed will start the mower.

Battery Level Indicator

The battery level indicator is located on the battery. The indicator

shows the condition of the battery and is on when the motor is

on. The indicator lit all the way to the right indicates the battery

is fully charged; as the indicator is lit more toward the left, it

indicates the battery is discharging. See Fig. 4-1 inset.

IMPORTANT: If the far left red light illuminates, the batteries will

need to be recharged before further use. Continued operation

before charging may shorten the life of the batteries.

Safety Key

The safety key must be present and inserted before the motor

can be started.

Controls and Features

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Remington 18A-212B783 Owner's Manual Page 12

Comments to this Manuals