Remington RM2520 Operator's Manual download pdf (Page 7)

OPERATING THE EZ-LINK™ SYSTEM

NOTE: To make installing or removing the attachment easier, place

the unit on the ground or on a work bench.

Installing the Attachment

NOTE: Remove the protective cap and gray spacer from the upper

and lower shafts prior to assembling the attachment.

1. Turn the knob counterclockwise to loosen (Fig. 4).

2. While firmly holding the attachment, push it straight into the

coupler until the release button snaps firmly into the primary

hole (Fig. 6).

NOTE: Aligning the release button with the guide recess will help

installation (Fig. 5).

3. Turn the knob clockwise to tighten (Fig. 4).

For decorative edging with the line head trimmer attachment, lock

the release button of the attachment into the 90° hole (Fig. 4).

Removing the Attachment

1. Turn the knob counterclockwise to loosen (Fig. 4).

2. Press and hold the release button (Fig. 5).

3. While firmly holding the upper shaft housing, pull the attachment

straight out of the coupler (Fig. 6).

The EZ-Link™ System

The EZ-Link™ system enables the use of these optional attachments:

• Edger*

• Cultivator

• Turbo Blower

• Brushcutter*

• Pole Saw

• Hedge Trimmer*

• Straight-shaft trimmer

• Curved-shaft trimmer

*DO NOT use this attachment with an electric powered unit.

WARNING:

Before you begin using any attachment,

read and understand the manual that came with the

attachment. Follow all safety information contained within.

CAUTION:

Before operating this unit, be sure that the

release button is fully snapped into the primary hole (Fig. 6),

and that the knob (Fig. 4) is securely tightened.

WARNING:

To avoid serious personal injury and

damage to the unit, shut the unit off before removing or

installing an attachment.

CAUTION:

These attachments are to be snapped into

the primary hole only. Using the wrong hole could lead to

personal injury or damage to the unit.

Fig. 5

Fig. 6

Fig. 4

Release Button

EZ-Link™

Coupler

Guide Recess

90˚ Edging Hole

(Trimmer Only)

Knob

Primary Hole

Lower Shaft

Housing

Upper Shaft

Housing

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comments to this Manuals

No comments

Remington RM2520 Operator's Manual Page 7

Comments to this Manuals

Related products and manuals for Grass trimmers Remington RM2520