Remington RM2520 Operator's Manual download pdf (Page 7)

Fig. 4

Knob

Tighten

Loosen

Fig. 6

Fig. 5

Coupler

Attachment

Release Button

Guide Recess

Primary Hole

WARNING:

Before using any attachment, read and

understand the manual that came with the attachment.

Follow all safety information contained within.

WARNING: To avoid serious personal injury and

damage to the unit, shut the unit off before removing or

installing an attachment.

OPERATING THE COUPLER

The coupler enables the use of various optional attachments.

Installing the Attachment

1. Remove the hanger cap from the attachment. Keep the hanger

cap for use when storing the attachment. If present, remove the

gray spacer from the coupler.

2. Set the unit on a flat, level surface.

3. Turn the knob counterclockwise to loosen the coupler (Fig. 4).

4. Align the release button with the guide recess (Fig. 6).

5. Push the attachment straight into the coupler (Fig. 5) until the

release button snaps firmly into the primary hole (Fig.6).

6. Turn the knob clockwise to tighten the coupler (Fig. 4).

Removing the Attachment

1. Set the unit on a flat, level surface.

2. Turn the knob counterclockwise to loosen the coupler (Fig. 4).

3. Press and hold the release button (Fig. 6).

4. Pull the attachment straight out of the coupler (Fig. 5).

CAUTION:

Before operating the unit, make sure the

release button is fully snapped into the primary hole and the

knob is securely tightened.

CAUTION:

Unless specified otherwise, the release

button should be snapped into the primary hole only. Using

the wrong hole could lead to personal injury or damage to

the unit.

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comments to this Manuals

No comments

Remington RM2520 Operator's Manual Page 7

Comments to this Manuals

Related products and manuals for Grass trimmers Remington RM2520