Remington ST3010A Owner's Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
8 |
118336
Chapter 4: Trimmer Operation
4. Measure out 30 feet of replacement
line.
5. Push one end of the new line through
the left line mounting hole on the
spool (see Figure 4-13).
Figure 4-13: Inserting line in left hole
Figure 4-14: Inserting line in right hole
Figure 4-15: Pulling line tight
Direction of
Line Feed
Direction of
Line Feed
Direction of
Line Feed
Figure 4-16: Arranging line into spool
Retaining
Slot
6. Feed 15 feet of the line through this
hole. Feed the other 15 feet of line
through the right line mounting hole
(see Figure 4-14). Pull the line tight
(see Figure 4-15).
7. Lay the line from the left mounting
hole into the upper spool section. Lay
the line from the right mounting hole
across the other line. Insert this line into
the retaining slot between the upper
and lower spool section, then lay the
line into the lower spool section. See
Figure 4-16 for proper line placement.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments