Remington BV12200A User Manual download pdf (Page 13)

REMINGTON ELECTRIC BLOWER/VAC | 9

120133

Figure 4-8: Holding blower/vac for vacuum operation

Figure 4-9: Picking up debris with vacuum

Vacuum Operation

WARNING: The vacuum can

throw debris, causing injury to

those nearby.

• Do not operate vacuum without

the vacuum bag attached or

with the bag zipper opened.

• Do not vacuum nails, glass,

rocks, wire, staples, or other

sharp, pointed, or hard objects.

These items could be thrown

through the cloth bag.

Properly assemble the blower/vac for

vacuum operation (see page 5, Converting

from Blower to Vacuum). Follow the steps

below to operate the vacuum.

1. Hang vacuum bag from your shoulder

using the attached strap. Hold blow-

er/vac using the handles on housing

and vacuum tube adapter assembly

(see Figure 4-8).

2. When ready to start the vacuum,

toggle the on/oﬀ switch to either the

low “I” or high “II” setting (see Figure

4-4).

3. Move end of vacuum tube over soft

debris. Vacuum will pick up debris,

chop it up, and deposit it into vacuum

bag (see Figure 4-9).

4. To stop the vacuum, toggle the on/oﬀ

switch to the oﬀ “O” setting.

CAUTION: Vacuum only soft

items such as leaves and cut

grass. Hard items such as sticks,

rocks, and acorns will damage the

impeller.

CAUTION: Do not force the

vacuum tube into a pile of debris.

Do not hold the tube upright and

force-feed debris into the tube.

These actions may clog and dam-

age the impeller. If the vacuum

vibrates excessively or makes

abnormal noises, turn vacuum o,

unplug power cord, and check for

clogging. Clear any clogged debris

from the blower/vac.

CAUTION: Normal vacuum

usage causes the vacuum bag to

wear and deteriorate. A worn or

deteriorated bag allows vacuum

to throw debris through the bag,

possibly hitting and injuring the

operator. Check vacuum bag fre-

quently. If it is worn, deteriorated,

or damaged, replace with a genu-

ine vacuum bag.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Comments to this Manuals

No comments