Remington IPL6000F User Manual download pdf (Page 8)

ENGLISH

F WARNING: always clean the Flash Window before use with the lint-free cloth provided to ensure there

is no oil or debris on the lens.

, Skin Contact Sensor (g. 1- 13&20)

The Skin Contact Sensor is a safety mechanism that prevents the device from accidental activation. In order

for the device to activate, the Skin Contact Sensor must be fully depressed against the skin.

, Flash Button (g. 1-5)

TheFlashButtonislocatedonthehandpiece.Toactivatetheashbulb,ensuretheSkinContactSensoris

fully engaged and press the Flash Button.

, Bulb Status Indicator Display (g. 1-8)

The device is ready to ash when the Bulb Status Indicator Display is illuminated green.

NOTE: if the Flash Button is pressed AND the Skin Contact Sensor is not fully engaged OR the Bulb Status

Indicator Display is not illuminated, an audible “beep” will sound. When the Bulb Status Indicator Display

illuminatesyellow,thereare150ashesremainingintheashbulb.WhentheBulbStatusIndicatorDisplay

ashesyellow,thebulbcartridgehasbeenusedupandwillnolongeroperate.Youmustreplacethebulb

cartridge to continue using the device.

, Treatment Head Release Buttons (g. 1-14)

Press both buttons and gently pull to remove the treatment head.

F WARNING: ALWAYSensuretheunitisOFFandthepowercordisdisconnectedbeforeremovingthenose

cone.IfthenoseconeisremovedwhiletheunitispoweredON,allindicatorlightsonthebaseunitwillash

and audible “beeps” will sound.

GETTING ACQUAINTED WITH i-LIGHT

, Long-Life Light Cartridge (g. 1-15)

Thelong-lifelightcartridgewilldeliver65,000ashesregardlessoftheenergylevelselected.Whileitis

unlikely you will ever need to replace it; it can be replaced by another long-life cartridge or SP-6000SB which

delivers1,500ashespercartridge.PleasecontactyourlocalRemington®ServiceCentre.

, Energy Level Selection (g. 1-6)

The i-Light device is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest

setting.

TIP:Forthemosteectiveresults,alwaysusethehighestenergylevelthatdoesnotcausediscomfortonthe

skin. To determine the energy level being used, observe the number of lights illuminated on the Energy

Level Display (g 1 - 9).

Youri-LightdevicewillautomaticallybesettoEnergyLevel1eachtimethedeviceispoweredON.To

change the level, press the Energy Level Selection Button.

, Test the i-Light device on your skin

1. Review the Warnings and Safety Precautions.

2. Familiarise yourself with the features of the i-Light.

3. Consult the Skin Tone Chart to ensure your skin colour is in the acceptable range (g. 5).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 203 204

No comments

Remington IPL6000F User Manual Page 8