Remington HC-912 Specifications download pdf (Page 2)

■ Do not run the entire unit under the tap, only the blade set is meant to be rinsed

in water.

■ Add oil, place a few drops of cutter or sewing machine oil onto the blades after

rinsing with water.

Note: Ensure that the hair clipper is turned off when cleaning.

Every six months:

At regular intervals the blade set should be removed and cleaned. To remove the

blade set, remove the two screws holding the large blade to the clipper body. The

blade set will separate from the body and can be cleaned as necessary. Brush out

hairs from between blades with the cleaning brush. Place a few drops of cutter or

sewing machine oil onto the blades. Wipe off excess oil.

Cleaning Cautions:

■ Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the

cutter casing.

■ Unplug the charge adaptor from the power outlet when not in use and when

cleaning.

Storage

■ Always store this appliance and cord in a moisture-free area.

■ Do not wrap the cord of the charging adaptor around the appliance.

■ Do not store in temperatures above 140ºF.

Troubleshooting

The clipper does not work when turned on:

■ Clipper must be charged for a full 14-16 hours, or use clipper while plugged

into wall.

Clipper cutters do not move:

■ The cutting unit may be dirty and clogged. Clean the unit as directed in

Cleaning & Maintaining section.

Clipper does not hold charge:

■ Fully discharge battery by running clipper until it stops; then follow recharging

instructions (see section on Charging Your Hair Clipper).

U.S. residents: To order accessories, contact us at 800-392-6544, visit us at www.

RemingtonProducts.com, or visit your local retailer.

Canadian residents: To order accessories, please call 800-268-0425 or visit us at

www.RemingtonProducts.com.

Cleaning & Maintaining Your Clipper

After each use:

■ Brush the accumulated hair from the cutters. Do not submerge the clipper

in water.

Click N’ Wash System

The Click N’ Wash system is designed to maximize the efficiency of washable

cleaning.

■ Click the Click N’ Wash buttons that are located on the sides of the hair clipper

head. The blades will slide out allowing the blade to be easily be cleaned under

the tap.

■ Once the blades are cleaned, lock them back into place by pushing the blade set

towards the clipper body. You will hear a “click” when blades are locked into place.

Battery Removal

When your rechargeable clipper reaches the end of its useful life, the batteries

must be removed and recycled or disposed of properly in accordance with your

local and state requirements.

The following procedure should be followed for battery removal:

■ Ensure device is unplugged from any electrical outlet.

■ Remove blade for ease of disassembly and safety by using a phillips screw

driver and removing both screws.

■ Remove plastic screw plug from underside of unit, located under rating stamp

using small flat head screw driver.

■ Remove screw located under rating stamp from underside of unit.

■ Use flat head screw driver to pry apart the body of the device into its two

halves.

■ Cut wires from the battery pack.

■ Remove battery pack from the device.

Battery

Cleaning & Maintenance

No responsibility, obligation, or liability is assumed for the installation or maintenance

of this product.

SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE

USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT

LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE

LIMITED IN DURATION TO FIVE YEARS FROM DATE OF ORIGINAL PURCHASE.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state or province to province. Some states do not allow

the exclusion or limitation of incidental, special or consequential damages.

Spectrum Brands, Inc. Money-back Offer

If within 30 days after you have purchased your Remington

branded product,

you are not satisfied and would like a refund, return it with the sales slip indicat-

ing purchase price and date of purchase to the retailer from whom it was pur-

chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product

within 30 days from the date of purchase. If you have any questions concerning

the money-back guarantee, please call 800-736-4648 in the US or 800-268-0425

in Canada.

Remington Guarantees Satisfaction After 30 Days!

Remington Men’s Shave and Groom 60-Day Money Back Guarantee*

If within 60 days after purchasing any Remington

branded Men’s Shave and

Groom product, you are not completely satisfied and would like a refund, return

it with the original dated sales receipt directly to Remington

and receive a full

refund.** For questions concerning the money-back guarantee, please call 800-

736-4648 in the US or 800-268-0425 in Canada.

**Terms and conditions apply.

Contains

listed adaptor

Contient un

adaptateur

homologué UL

Limited Five-Year Warranty

Spectrum Brands, Inc. warrants this product against any defects that are due to

faulty material or workmanship for a five-year period from the original date of

consumer purchase. This warranty does not include damage to the product

resulting from accident or misuse.

If the product should become defective within the warranty period, we will

replace it free of charge. Return your product with your name, address and day

time phone number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1,

Deforest, WI 53532. For more information call 800-736-4648 in the US or

800-268-0425 in Canada.

This warranty does not cover products damaged by the following:

■ Accident, misuse, abuse or alteration of the product

■ Servicing by unauthorized persons

■ Use with unauthorized accessories

■ Connecting it to incorrect current and voltage

■ Wrapping cord around appliance causing premature wear & breakage

■ Any other conditions beyond our control

Warranty

Charging Your Hair Clipper

■ Clipper must be turned off.

■ Insert the adapter plug into the bottom of the clipper and plug the adapter unit

into a power outlet. The amber light will glow to indicate that it is charging.

■ The clipper will be fully charged in 14-16 hours.

■ The batteries cannot be overcharged, but we recommend that charging be

discontinued if the clipper will not be used for a long period of time.

■ It is advisable not to use this clipper directly from the power outlet when

it has been fully charged, but if while using the clipper in cordless mode there

is a noticeable drop in power, you can use directly from the power outlet.

Never use under water when connected to the outlet.

■ If the clipper has not been used for a month or longer, it is advisable to

recharge it for 14-16 hours.

■ To preserve the life of the batteries, discharge them by running the clipper

until the blades move slowly. Switch off and fully recharge. Do this every

six months.

■ Charge the clipper at temperatures between 40º-90ºF.

■ Nickel-Metal Hydride batteries included. See battery removal section for

proper disposal of batteries.

USB charging

■ Some models are capable of charging via USB port on a PC. Do not run the

product when charging via USB port on a PC.

Hair Texturizor

Simply adjust the hair thinner mechanism by sliding the button at the top of the

hair clipper.

■ Cut hair to desired length.

■ Select a comb attachment on to two lengths shorter than initial comb length

and attach to clipper.

■ Slide Texture Release button into place, exposing hair texturizor.

■ Repeat hair cutting technique in areas you desire to be texturized.

Auto Boost System (Only for HC5750)

There are 3 settings for the Auto Boost system: Off, Auto and Boost.

■ If the clipper is set to Auto it will run at regular power under low load

conditions.

■ When more power is needed, the clipper with automatically sense and provide

maximum Boost.

■ If the clipper is set to Boost, it will run at maximum power at all times.

Dual Boost System (Only for HC5550)

There are 3 settings for the Dual Boost system: Off, On, Boost.

■ If the clipper is set to On, it will run at regular power.

■ If the clipper is set to Boost, it will provide maximum power

How to Use

120 VAC 60 Hz

T22-31022

Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in

Canada

or visit RemingtonProducts.com.

Dist. by: Spectrum Brands, Inc., Madison, WI 53711

Dist. by: Spectrum Brands Canada Inc., Mississauga, ON L5L OA1

REMINGTON is a registered trademark of ROVCAL, Inc.,

a subsidiary of Spectrum Brands, Inc.

12/12 Job# 2012-9-20_105

Manufactured to Remington’s specifications in the PRC.

Terms and Conditions

1. Refund will be in the form of a check issued in US Dollars and will be provided

only if all Terms and Conditions are met.

2. The following items must be returned to Remington

and postmarked no later

than 60 days after purchase of the Remington

branded Men’s Shave and

Groom product:

a. The Remington

product;

b. The original sales receipt indicating price and date purchased; and

c. The completed 60-day money back guarantee form located at

RemingtonProducts.com/60day.

3. In addition, Remington

, in its discretion, must determine that the returned

product was used in accordance with the instruction booklet (included with the

product at the time of purchase).

4. Returns should be mailed prepaid (no collect returns accepted) to:

Remington 60-Day MBG

507 Stokely Drive, Box 1

DeForest, WI 53532

5. Refund does not include postage costs for the return of the product, but will

include applicable taxes paid by customer, if any.

6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged

product.

7. Please allow 4-6 weeks to receive your refund by check.

*Applies to US and Canadian customers’ returns only.

1 2

Comments to this Manuals

No comments

Remington HC-912 Specifications Page 2

Comments to this Manuals

Related products and manuals for Beard trimmers Remington HC-912