Remington RM193BVT Owner's Manual download pdf (Page 16)

12 |

6 troubleshooting

WARNING: Unplug blower/vac from power source before servicing. Severe

injury or death could occur from re, electrical shock, or rotating impeller.

OBSERVED FAULT POSSIBLE CAUSE REMEDY

Motor does not run when you turn on/o

switch low or high

1. Bottom inlet cover or vacuum tube

adapter not locked into place

2. Extension cord connection is loose

1. Check inlet cover or vacuum tube

adapter for proper installation (see

blower/vac assembly, page 4)

2. Check cord connection at electrical

outlet and at rear of blower/vac

Motor runs, but vacuum will not pick

up debris

1. Clogged vacuum tube or impeller

2. Vacuum bag full

1. Follow steps under Removing

Clogged Debris from the Impeller,

page 10

2. Empty vacuum bag (see Emptying

the Vacuum Bag, page 10

Blower/vac vibrates excessively and/or

makes abnormal noises

Clogged vacuum tube or impeller Follow steps under Removing Clogged

Debris from the Impeller, page 10

Note: For additional help, visit

www.remingtonpowertools.com.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Remington RM193BVT Owner's Manual Page 16